I agree that a tek scope should be your first purchase. I got mine from ebay and did some minor repairs. You can see a very basic workbench here: http://www.qrz.com/db/W8EZI
I have repaired a lot of transceivers and audio equipment at that bench. The radio sitting on the bench in the picture is a Icom 751A that belongs to a friend. It had burned out finals with associated damage.
Michael
--- In Amateur-repairs@yahoogroups.com, "k4tfj" <timothy.f.johnston@...> wrote:
>
> I haven't had a functioning workbench in 20+ years.
> But now, with an empty nest and rooms available, the bench will be born soon, but as with all newborns, it will be naked, with the exception of a couple DMM's and a MFJ-259B antenna analyzer.
>
> The DMM's are fairly basic, but one has frequency measurement to 10MHz and a capacitance function. The 259B has a frequency counter function as well as inductance, capacitance and the ability to generate un-modulated RF signals. I also have a DSI 5600A counter waiting to be repaired (just a bad 7805, I think). That being the current state of my test equipment.
>
> My intent is to be able to perform basic alignments and testing of my current radio gear, and a little experimentation and restorations. Rigs/radios include Conar 400/500, Kenwood TS-520s, Alinco DX-70T, assorted VHF mobiles and handhelds. Up for restoration currently is a Zenith 11S474 Receiver and a Hammurland SP-600-11 Receiver.
>
> Budget is $200-$300 a month, to locate and purchase affordable test equipment.
>
> My first instinctive thought is "I need an O'scope!!" and a VOM/VTVM capable of 3kvdc+.
> Any comments and recommendations on these?
>
> What other gear would you recommend and in what priority?
>
>
> TJ, K4TFJ
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (18) |
No comments:
Post a Comment