Thursday, 26 March 2015

[Amateur-repairs] Radio test set recomendation

 

Hi,
At the moment my test equipment are two analog oscilloscope, one RF
generator (Philips PM 5321), RF power meter, multimeter, frecuency counter
and dummy load

I want to improve my workbench with some test equipment, therefore, I'm
thinking of buying a redio test set (radio AM-FM communication analyzer). I
think it is a very useful tool. The downside is that it is very expensive.
Which one do you recommend?

Do you think It is worth to have one? or otherwise, with a good RF
generator and a spectrum analyzer are sufficient.

Thanks for your opinions.

Regards,
Antonio

[Non-text portions of this message have been removed]

__._,_.___
Posted by: =?UTF-8?Q?Antonio_P=C3=A9rez_Luna?= <a.perezluna@gmail.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)
TO UNSUBSCRIBE: login to groups.yahoo.com, select group amateur-repairs, click on "leave group" on right side of screen and follow instructions.  PLEASE do not send UNSUBSCRIBE messages to the list.

.

__,_._,___
Posted by at No comments:

Sunday, 15 March 2015

[Electronics_101] test

 



__._,_.___
Posted by: DaveC <davec2468@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (4)
Please trim excess when replying

.

__,_._,___
Posted by at No comments:

Tuesday, 10 March 2015

[Prints_and_Plans] This Is Just A Test - Please Ignore - Literally

 

...but if you can't, I'm validating a change I made to my Yahoo id.

__._,_.___
Posted by: "Jim E." <jim0000@verizon.net>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (78)

.

__,_._,___
Posted by at No comments:

Tuesday, 3 February 2015

[sherline] New Phooto / Beyond Basics / Trial Slotting Test

 

Album;
"Beyond Basics"
Photo shows my set up to test the Power Feed using a 4" Diameter
carbide tipped Slotting Saw.
Jerry G (Glickstein)

__._,_.___
Posted by: chieftoolmaker@earthlink.net
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
Posted by at No comments:

Monday, 2 February 2015

[sherline] New Photo / Beyond Basics / Test Piece

 

Album;
"Beyond Basics "
Photo shows the Test Piece bottom being counter bored to
accommodate the protrusion of the Sherline T-Nut above the Mill table.
Jerry G (Glickstein)


__._,_.___
Posted by: chieftoolmaker@earthlink.net
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
Posted by at No comments:

Sunday, 1 February 2015

[sherline] New Photos / Beyond Basics / Test Piece

 


Album;
"Beyond Basics "
Photos show the preparation for a test piece to try out the Power Feed.
6061 Aluminum 3/4" by 1 1/2" by about 6 1/4"
It has been aligned to the X axis , ends milled.
Next step is  to center drill, drill and counter bore  mounting holes.
# 10's, of course.
Jerry G (Glickstein)

__._,_.___
Posted by: chieftoolmaker@earthlink.net
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
Posted by at No comments:

Wednesday, 21 January 2015

[sherline] New Photo / Swift 1805/2015 / Cross Test Level Installed

 



Album;
"Swift 1805/2015"
Photo shows the Cross Test Level fitted and installed on  the main beam  of the Keel Klamper.
Questions?
Comments?
Jerry G (Glickstein)
(Next step is to take down the bulkheads and check the center keel for flatness.
 

__._,_.___
Posted by: chieftoolmaker@earthlink.net
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
Posted by at No comments:
Subscribe to: Posts (Atom)