Saturday, 29 November 2014

Re: [Simply Computers] PXE E61 Media test failure

 

You put in a 1 TB drive, but did you format it and install an operating
system?

If you have the computer set to boot to the hard drive first, but are
getting a PXE error, then the computer is not finding an OS on the drive.

- Mark

-----Original Message-----
From: combatsambowarrior
Sent: Friday, November 28, 2014 6:47 PM
To: simplycomputers2@yahoogroups.com
Subject: [Simply Computers] PXE E61 Media test failure

I get this, I have a Lenovo B 50 70

It is rated for a max of 16GB RAM and 1TB HDD

I put in both, the ram is in but the HDD I installed gets this message, I
checked the connections and they are fine

Bios does read the Hd in which is WD 2.5 inch HDD

?

I did check the boot orders sequence and HDD is first on top, not anything
else

__._,_.___
Posted by: "MUT" <muthomas45@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (4)
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2


.

__,_._,___
Posted by at No comments:

RE: [Simply Computers] PXE E61 Media test failure

 

From what I can gather this is a Lenovo B570.

 

According to what I was able to research on Lenovo's support site, this unit takes a maximum of 8gb of ram.

 

Were you able to determine if the drive is operating apart from booting. For example, it might be worth testing the drive with WD's drive tools.

 

The exact error message seems to indicate you are attempting to boot to a network drive. One solution suggested disabling or turning off booting to a lan.

 

One other recommendation pointed to a failing CMOS battery.

 

Vincent Winterling

Vineland, NJ

 

From: simplycomputers2@yahoogroups.com [mailto:simplycomputers2@yahoogroups.com] On Behalf Of combatsambowarrior
Sent: Friday, November 28, 2014 9:47 PM
To: simplycomputers2@yahoogroups.com
Subject: [Simply Computers] PXE E61 Media test failure

 



I get this, I have a Lenovo B 50 70

It is rated for a max of 16GB RAM and 1TB HDD

I put in both, the ram is in but the HDD I installed gets this message, I checked the connections and they are fine

Bios does read the Hd in which is WD 2.5 inch HDD

?

I did check the boot orders sequence and HDD is first on top, not anything else


__._,_.___
Posted by: Vincent Winterling <vincentwinterling@outlook.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (2)
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2


.

__,_._,___
Posted by at No comments:

Re: [Simply Computers] PXE E61 Media test failure

 

For testing purposes we usually have the CD first to boot for installing Windows or running Boot or Live CDs like Hiren's Boot CD or Puppy Linux. Of course, I never ran an SSD hard drive, so testing those might be different...others will help you, too.
Hmm, PXE usually means booting from a network attached server...
Joan in Reno

From: combatsambowarrior <no_reply@yahoogroups.com>
To: simplycomputers2@yahoogroups.com
Sent: Friday, November 28, 2014 6:47 PM
Subject: [Simply Computers] PXE E61 Media test failure

 
I get this, I have a Lenovo B 50 70

It is rated for a max of 16GB RAM and 1TB HDD

I put in both, the ram is in but the HDD I installed gets this message, I checked the connections and they are fine

Bios does read the Hd in which is WD 2.5 inch HDD

?

I did check the boot orders sequence and HDD is first on top, not anything else


__._,_.___
Posted by: Joan Leach <jleach728@sbcglobal.net>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (3)
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2


.

__,_._,___
Posted by at No comments:

Friday, 28 November 2014

[Simply Computers] PXE E61 Media test failure

 

I get this, I have a Lenovo B 50 70

It is rated for a max of 16GB RAM and 1TB HDD

I put in both, the ram is in but the HDD I installed gets this message, I checked the connections and they are fine

Bios does read the Hd in which is WD 2.5 inch HDD

?

I did check the boot orders sequence and HDD is first on top, not anything else

__._,_.___
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2


.

__,_._,___
Posted by at No comments:

Monday, 24 November 2014

[sherline] New Photos / Work Aids II / ABS Test Block

 

Album;
"Work Aids II "
Photos show the steps taken to test a reverse countersink.
Material was chosen to match the formed/molded ABS of the Amati Keel Klamper, which is under modification.
More later as work progresses.
Jerry G (Glickstein)
( Photos are of my Sherline Horizontal Conversion Mill)

__._,_.___
Posted by: chieftoolmaker@earthlink.net
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
Posted by at No comments:

Tuesday, 28 October 2014

[Amateur-repairs] test

 

test

__._,_.___
Posted by: "Ray, W4BYG" <w4byg@att.net>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (9)
TO UNSUBSCRIBE: login to groups.yahoo.com, select group amateur-repairs, click on "leave group" on right side of screen and follow instructions.  PLEASE do not send UNSUBSCRIBE messages to the list.

.

__,_._,___
Posted by at No comments:

Tuesday, 21 October 2014

Re: [atlas_craftsman] Truth about Purple cleaner actual test

 



I have no idea if the material was coated in fact, or not.  If it was, it is a thin coating, and the lye apparently removed it easily.  There was a slight delay between putting in the sample and the beginning of bubbling, which I can accept attributing to a coating.
 
I have no doubt whatever that the coating, if present, was removed and the aluminum was directly attacked, due to the vigorous bubbling on both sides.  The "hand" of the etched side is different, in keeping with it being somewhat thinner, as well.  I did not, however, attempt to ignite the gas given off, which would presumably be hydrogen.
 
Mentioning the test elsewhere produced a host of folks who routinely clean aluminum with lye based cleaners, and who cannot figure out what the fuss is about.
 
Jerry
----- Original Message -----
Sent: Tuesday, October 21, 2014 10:12 AM
Subject: Re: [atlas_craftsman] Truth about Purple cleaner actual test

I am very willing to believe that the Purple cleaner has only a slight reaction with bare Aluminum over a reasonably short time, ie cleaning but not prolonged submersion with a large volume of cleaner.

That said, it is possible that the cleaner in the experiment only removed the plastic on both sides? If the plastic is on both sides its removal might explain the difference in pre/post test measurements?

Might be interesting to repeat with a non coated sample?

Whit

Sent from my iPhone

 

__._,_.___
Posted by: <jerdal@sbcglobal.net>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (6)
TO UNSUBSCRIBE FROM THE LIST:
You do this yourself by sending a message to:
atlas_craftsman-unsubscribe@yahoogroups.com

Atlas-Craftsman Projects list is at http://groups.yahoo.com/group/atlas_craftsman_projects/

To see or edit your personal settings, view the photos, files or links http://groups.yahoo.com/group/atlas_craftsman/

The Atlas-Craftsman Wiki is at http://pico-systems.com/cgi-bin/Atlas-wiki/Atlas.cgi
Please submit things you think will be useful to Jon Elson at mailto://elson@pico-systems.com

.

__,_._,___
Posted by at No comments:
Subscribe to: Posts (Atom)