Sunday, 2 December 2012

RE: [Electronics_101] DMM, continuity test - on soldered uC

 

I doubt you can damage the IC as the DMM ohmmeter voltage is low.

I just use a microscope or magnifying glass to inspect the joints after
soldering. But DO use the flux! Much easier. I carry solder to the joint
on the iron. Oh yeah, I can hear my buddies! But with flux, it works well.
I do the work with a head band magnifier. At my age, 72, hand does not
shake too badly! I do all SMD but no smaller than 0805.

There are some neat microscope/cameras on Ebay for about $30. They work
great!

Best wishes. You should do just fine.

Larry

From: Electronics_101@yahoogroups.com
[mailto:Electronics_101@yahoogroups.com] On Behalf Of Banibrata Dutta
Sent: Sunday, December 02, 2012 9:30 AM
To: Electronics_101@yahoogroups.com
Subject: [Electronics_101] DMM, continuity test - on soldered uC

Planning to do my first, at home SMD soldering, of a TQFP 64 uC, on a
breakout board. Will be trying the extra flux + drag soldering technique,
based on couple of videos I've seen.

Wanted to check if it is okay to check for good solder contacts, by doing
the standard DMM continuity test between the uC pins, and the corresponding
breakout board header pin ? Or can it damage the IC in some way ?

cheers,
BD

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Please trim excess when replying
.

__,_._,___

[Electronics_101] DMM, continuity test - on soldered uC

 

Planning to do my first, at home SMD soldering, of a TQFP 64 uC, on a
breakout board. Will be trying the extra flux + drag soldering technique,
based on couple of videos I've seen.

Wanted to check if it is okay to check for good solder contacts, by doing
the standard DMM continuity test between the uC pins, and the corresponding
breakout board header pin ? Or can it damage the IC in some way ?

cheers,
BD

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)
Please trim excess when replying
.

__,_._,___

Saturday, 1 December 2012

[Simply Computers] Re: How Best to Test Seagate ST31500341AS

 

Hi Bill, Ardell and Mike,
Thanks for responding so quickly, and for your advice. I will get on it first thing tomorrow.
Ellen

--- In simplycomputers2@yahoogroups.com, "Bill Aycock" <billaycock@...> wrote:
>
> Ellen--
> Ardell's advice, below, is very sound, as usual. However, Let me add
> something. As soon as possible, get (Or use, if you have one) an extra HDD
> to use as a back-up, and make an Image of your system, just in case. (You
> should have one, anyway) This way, is the drive IS bad, you can replace it
> and reload the system, and be where you are now.
> Bill--W4BSG
>
> -----Original Message-----
> From: Ardell Faul
> Sent: Saturday, December 01, 2012 5:38 PM
> To: simplycomputers2@yahoogroups.com
> Subject: Re: [Simply Computers] How Best to Test Seagate ST31500341AS
>
> I like HDAT2 which is available in Hiren's boot CD. You can download
> the .iso file easily and use it to make a bootable CD. Then boot up
> with it and go to DOS Tools, Hard Drive utilities, HDAT2 and let it run
> a full test of your hard drive. It even can repair bad sectors and make
> the drive readable if it is failing so you can clone it whiel the
> cloning is still possible.
>
> Ardell Faul
> Computer Monitor Service Inc.
> Ardell's Laptop and PC Repair
> 10816 E. Mission Ave.,
> Spokane Valley, Wa. 99206
> ardell@...
> 509-891-5188
>
> On 12/1/2012 3:04 PM, ejhberg wrote:
> >
> > Hi all,
> > My system is a Dell Studio XPS 9100, Win 7 Home Premium, with a
> > Seagate ST31500341AS 1.5T Serial ATA 2 HD. A couple of days ago when I
> > closed Outlook 2007 a Microsoft Office Diagnostics window opened and
> > asked if I wanted to find out why Outlook was crashing so much. I ran
> > the diagnostics, and although it could not determine why Outlook was
> > crashing, I got information that the hard drive was going to "crash"
> > soon (or words to that effect).
> > I would like to run some diagnostics tests on the HD to see if the
> > hard drive is in danger of crashing very soon. I purchased this system
> > almost exactly two years ago, and am hoping that the Office
> > Diagnostics are not accurate, but want to be sure.
> > What do you recommend? Is Seatools still a reliable way to go? Should
> > I run the DOS version over the Windows version?
> > Any other suggestions you can give will be appreciated. Please let me
> > know if you need more information.
> > Thanks,
> > Ellen

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (5)
Recent Activity:
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

.

__,_._,___

Re: [Simply Computers] How Best to Test Seagate ST31500341AS

 

Ellen--
Ardell's advice, below, is very sound, as usual. However, Let me add
something. As soon as possible, get (Or use, if you have one) an extra HDD
to use as a back-up, and make an Image of your system, just in case. (You
should have one, anyway) This way, is the drive IS bad, you can replace it
and reload the system, and be where you are now.
Bill--W4BSG

-----Original Message-----
From: Ardell Faul
Sent: Saturday, December 01, 2012 5:38 PM
To: simplycomputers2@yahoogroups.com
Subject: Re: [Simply Computers] How Best to Test Seagate ST31500341AS

I like HDAT2 which is available in Hiren's boot CD. You can download
the .iso file easily and use it to make a bootable CD. Then boot up
with it and go to DOS Tools, Hard Drive utilities, HDAT2 and let it run
a full test of your hard drive. It even can repair bad sectors and make
the drive readable if it is failing so you can clone it whiel the
cloning is still possible.

Ardell Faul
Computer Monitor Service Inc.
Ardell's Laptop and PC Repair
10816 E. Mission Ave.,
Spokane Valley, Wa. 99206
ardell@icehouse.net
509-891-5188

On 12/1/2012 3:04 PM, ejhberg wrote:
>
> Hi all,
> My system is a Dell Studio XPS 9100, Win 7 Home Premium, with a
> Seagate ST31500341AS 1.5T Serial ATA 2 HD. A couple of days ago when I
> closed Outlook 2007 a Microsoft Office Diagnostics window opened and
> asked if I wanted to find out why Outlook was crashing so much. I ran
> the diagnostics, and although it could not determine why Outlook was
> crashing, I got information that the hard drive was going to "crash"
> soon (or words to that effect).
> I would like to run some diagnostics tests on the HD to see if the
> hard drive is in danger of crashing very soon. I purchased this system
> almost exactly two years ago, and am hoping that the Office
> Diagnostics are not accurate, but want to be sure.
> What do you recommend? Is Seatools still a reliable way to go? Should
> I run the DOS version over the Windows version?
> Any other suggestions you can give will be appreciated. Please let me
> know if you need more information.
> Thanks,
> Ellen
>
>

[Non-text portions of this message have been removed]

------------------------------------

Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing
100% free Computer Tech Support since 1999. With over 12,000 members Simply
Computers is one of the largest and most active Tech Support Forums on the
Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

Yahoo! Groups Links

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Recent Activity:
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

.

__,_._,___

Re: [Simply Computers] How Best to Test Seagate ST31500341AS

 

I like HDAT2 which is available in Hiren's boot CD. You can download
the .iso file easily and use it to make a bootable CD. Then boot up
with it and go to DOS Tools, Hard Drive utilities, HDAT2 and let it run
a full test of your hard drive. It even can repair bad sectors and make
the drive readable if it is failing so you can clone it whiel the
cloning is still possible.

Ardell Faul
Computer Monitor Service Inc.
Ardell's Laptop and PC Repair
10816 E. Mission Ave.,
Spokane Valley, Wa. 99206
ardell@icehouse.net
509-891-5188

On 12/1/2012 3:04 PM, ejhberg wrote:
>
> Hi all,
> My system is a Dell Studio XPS 9100, Win 7 Home Premium, with a
> Seagate ST31500341AS 1.5T Serial ATA 2 HD. A couple of days ago when I
> closed Outlook 2007 a Microsoft Office Diagnostics window opened and
> asked if I wanted to find out why Outlook was crashing so much. I ran
> the diagnostics, and although it could not determine why Outlook was
> crashing, I got information that the hard drive was going to "crash"
> soon (or words to that effect).
> I would like to run some diagnostics tests on the HD to see if the
> hard drive is in danger of crashing very soon. I purchased this system
> almost exactly two years ago, and am hoping that the Office
> Diagnostics are not accurate, but want to be sure.
> What do you recommend? Is Seatools still a reliable way to go? Should
> I run the DOS version over the Windows version?
> Any other suggestions you can give will be appreciated. Please let me
> know if you need more information.
> Thanks,
> Ellen
>
>

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

.

__,_._,___

Re: [Simply Computers] How Best to Test Seagate ST31500341AS

 

I still use Seatools for windows

Mike Stone

-----Original Message-----
From: ejhberg <ejhcolo@comcast.net>
To: simplycomputers2 <simplycomputers2@yahoogroups.com>
Sent: Sat, Dec 1, 2012 3:04 pm
Subject: [Simply Computers] How Best to Test Seagate ST31500341AS

Hi all,
My system is a Dell Studio XPS 9100, Win 7 Home Premium, with a Seagate ST31500341AS 1.5T Serial ATA 2 HD. A couple of days ago when I closed Outlook 2007 a Microsoft Office Diagnostics window opened and asked if I wanted to find out why Outlook was crashing so much. I ran the diagnostics, and although it could not determine why Outlook was crashing, I got information that the hard drive was going to "crash" soon (or words to that effect).
I would like to run some diagnostics tests on the HD to see if the hard drive is in danger of crashing very soon. I purchased this system almost exactly two years ago, and am hoping that the Office Diagnostics are not accurate, but want to be sure.
What do you recommend? Is Seatools still a reliable way to go? Should I run the DOS version over the Windows version?
Any other suggestions you can give will be appreciated. Please let me know if you need more information.
Thanks,
Ellen

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Recent Activity:
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

.

__,_._,___

[Simply Computers] How Best to Test Seagate ST31500341AS

 

Hi all,
My system is a Dell Studio XPS 9100, Win 7 Home Premium, with a Seagate ST31500341AS 1.5T Serial ATA 2 HD. A couple of days ago when I closed Outlook 2007 a Microsoft Office Diagnostics window opened and asked if I wanted to find out why Outlook was crashing so much. I ran the diagnostics, and although it could not determine why Outlook was crashing, I got information that the hard drive was going to "crash" soon (or words to that effect).
I would like to run some diagnostics tests on the HD to see if the hard drive is in danger of crashing very soon. I purchased this system almost exactly two years ago, and am hoping that the Office Diagnostics are not accurate, but want to be sure.
What do you recommend? Is Seatools still a reliable way to go? Should I run the DOS version over the Windows version?
Any other suggestions you can give will be appreciated. Please let me know if you need more information.
Thanks,
Ellen

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)
Recent Activity:
Visit Simply Computers Tech Support Group and Helpdesk (24x7). Providing 100% free Computer Tech Support since 1999. With over 12,000 members Simply Computers is one of the largest and most active Tech Support Forums on the Internet.
http://tech.groups.yahoo.com/group/simplycomputers2

.

__,_._,___